Baltimore Boating Center, LLC
2015 Turkey Point Road
Baltimore, Maryland, US, 21221
KenCraft Bay Rider 239 - main image

2019 KenCraft Bay Rider 239

location icon Essex, Maryland
Year 2019
Length 23 ft

2019 Kencraft 239 Bay Rider - Powered by a reliable Yamaha 200 Four Stroke Engine - For the Fisherman  that wants to head offshore for some big action or head to the skinny water with a draft of 12" or get out there and do some crabbing!!      Kencraft's MSRP $75,827 - Internet Pricing on Kencraft's Website is $55,586  - BLOW OUT on our STOCK BOAT  $51,900. 

See Video Link below to Bay Rider running on the water


Year Built 2019
Category Power
Length Overall 23'5 ft
Beam 8'6 ft
Construction Fiberglass
Deadrise Angle 16 °
Min Draft 1 ft
Engines 1
Total Engine Power 200 hp
Fuel Tanks 1
Fuel Tank Cap. 73 gal
Dry Weight 2,000 lb

Engine 1 Specifications

Make: Yamaha
Model: 200 Four Stroke
Fuel: Unleaded
Engine Power: 200hp
Type: Outboard
Propeller Type: 3 Blade, Stainless Steel
Year: 2018
Engine Location: Center
Manufacturer Description

New from KenCraft Boats in 2018 is our Inshore/Offshore Bay Rider 239. We designed our 239 for the avid fisherman that needs to fish the skinny water with a draft of 12 inches as well as the fisherman that wants to head offshore for some larger action.  With a dead rise of 16° at the transom and 52° at our wide Carolina Flare bow, this boat can handle the rougher water you might encounter offshore.  With higher freeboard than our previous model and a true self bailing floor, we have introduced a Bay boat like no other on the market today.  Combine these fishing features with the comfort features the family desires for a cruising boat, and you have designed the perfect combination of a family cruiser and multipurpose fishing boat.

We have new deluxe forward seating with flush mounted backrest brackets unlike our competitors.  We have a large casting deck up front with plenty of room to fish.  New for 2018 is under gunwale rod storage for all of your favorite rods and the new wider gunwales make room for our Mate Series combination rod and cup holders.  You can install as many as you want.  The trolling motor is mounted on the upper deck where we have a new integrated anchor locker to hold the large FX-7 aluminum anchor. The forward seats/fish box coolers are fully foamed to hold ice for long periods of time, and they drain overboard.  The seat lids lift vertically on 316 stainless gas struts to allow easy access to the drinks or the fish.  The console houses a 15 gallon livewell and the New Optional 45 gallon fiberglass livewell leaning post is compact yet allows for comfortable seating for two.  Rear jump seats add additional seating for cruising.

Factory Options on this Bay Rider
  • Deluxe Hard TTop w/Electronics Box, Sky Blue Finished Underside, Six Tulip Rod Holders, Forward & Aft Speakers, LED Spreader Lights Forward & Aft, Mast Light
  • Wet Sounds Fusion Stereo in the Console
  • Pop-Up Bow LIght
  • Tackle Storage Box in Console
  • Raw Water Washdown w/outlet in motorwell
  • 12x12 Bennett Trim Tabs w/LED indicators that auto retract
  • 6" Atlas Jackplate
  • Forward Jumpseat bottoms & backrests (stern seat & back rests are standard)
Standard Features included in 239 Bay Rider
  • Aluminum Leaning post w/folding footrest & 4 tulip rod holders
  • Large Insulated Fish & Storage Boxes
  • Recessed Horizontal Rod Storage
  • Six Mate Series Rod Holders/Cup Holder Combo with Drains to the Deck
  • Six Forward, Aft & Midship  Accon Stainless Steel Pull Up Cleats
  • Dual Battery Switch
  • Trolling Motor Plug w/pre-wire to Console
  • Yamaha Digital Command Link Gauges
  • Sea Star Tilt Helm w/Stainless Steering Wheel & Power Knob
  • Sea Star Hydraulic Steering w/Upgraded Lines
  • Livewell w/Recirculating Aerator & Clear Gasket Lid
  • Ritchie Compass
  • Lockable Console Storage Box w/Gasket
  • Stainless 8 Switch Bocatech Backlit Switch Panel
  • Two USB Charging Plugs and One 12 volt Accessory Plug
  • Swim Platform w/ Stainless Steel Grab Rail and Ladder
  • Automatic Bilge Pumps w/Float Switch
  • Bronze Thru Hulls w/Shutoff Valves
  • Helm Seating Package - Seat Bottom and Backrest
  • Console Package - Removable Seat Bottom and Backrests
  • Rear Package - Removable Jumpseat Bottoms and Backrests
Baltimore Boating Center
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.
Additional Contact Information